Aerospace tungsten alloy counterweight

In the design of aerospace and defense industries that require high density, good mechanical strength, easy processing of the material, the tungsten alloy is the best choice. The high-density tungsten alloy products greatly reduces the physical size of components. This makes it much easier to control weight distribution, increasing the sensitivity of the control mechanism. When a lot of material needs to be placed in a small space, the tungsten alloy to become the best materials.

Tungsten Alloy Golf Club Counterweight

Tungsten alloy golf club counterweight, some call it counter balancing while others call it back weighting, which was demonstrated to help golfers hit about 30 farer and 70 percent straighter.
Recently the success rate for improvement of both distance and direction has gradually attracted golfers’ attention, and increased the use of a new product called the tungsten alloy counterweight. Golfers can add weight down the shaft in various positions creating changes in swing path and release dynamics of golf-clubs thus improving the golfer’s direction and distance.

Tungsten Alloy Cranshaft Counterweights

Tungsten alloy counterweights is added in auto racing for stabilizing the car and ensuring the car is within the required weight class for the race by putting more weight over the drive wheels.
Tungsten alloys are used in crankshaft as counterweight. The tungsten alloy crankshaft counterweights are designed to offset the weight of the rod and pistons. It is critical that the crankshafts must be balanced to customized rod and piston combination. As tungsten alloy has high density, so adding WHA balance weight into the racing car has good effected in optimizing the performance of the racing car during the racing progress, which contributes to the better control of the car's movement.

Tungsten Alloy Sword Counterweight

 One method of counter weighting sword is adding tungsten alloy counterweight to the pommel. This puts the weight as far away from the tip as possible, and is thus the most effective method per ounce of added weight of lowering the balance point. Downsides compared to other methods include aesthetic issues, durability, and relative complexity of construction. For a relatively small degree of counter weighting, simply incorporating a large amount of tape while constructing the pommel can help. For more dramatic counter weighting, tungsten alloy with high density can be built into the inner layer of the pommel. 
Another method of counter weighting sword is placing tungsten alloy counterweight on the handle. This has the added effect of increasing the diameter of a sword's handle and is easier to construct and less likely to be ugly than pommel counter weighting. However, since the weight is slightly higher on the blade, it takes somewhat more added weight to the sword than pommel counter weighting to bring the balance down to the same point. The most common method for (extensive) handle counter weighting is to wrap wire around the handle. Tungsten alloy counterweight of various types can also be used.

Tungsten Alloy Fishing Sinker Counterweight

A tungsten alloy fishing sinker counterweight is used to force a lure or bait to sink sometimes to the bottom of the waterway. Sinkers are made of tungsten alloy as the material is inexpensive and easily machine so that it can be mold into a large variety of shapes for specific fishing applications.
Tungsten alloy weights are an ideal, environmentally friendly alternative to lead weights, which are toxic and increasingly being labeled an environmental hazard. They are harder than steel and extremely dense, tungsten being on average 30 percent smaller than its lead counterpart. Meanwhile, they are smaller than conventional weights, create twice the sound of lead weights and maintain their shape for longer. Tungsten alloy is also used in the production of other fishing applications, such as tungsten alloy line cutters.

Tungsten Heavy Alloy Aerospace Counterweight

With many advantages over conventional balance materials such as steel or lead, tungsten alloy counterweights are often used in Flight Control Systems to optimize the performance of flight control surfaces, such as rudders, elevators and ailerons.
Secondly, as helicopter rotor blades demand perfect balance, so tungsten heavy alloy can be utilized in Rotor Blades to compensate for any imbalances built into individual blades during the manufacturing process such as helicopter balance. 
Thirdly, tungsten alloy counterweights are incorporated into the pitch control system of many propeller designs as a fail-safe device to prevent over speed.

Why Choose the Raw Material of Tungsten Heavy Alloy?

Enjoy easier, better riveting with less fatigue. Tungsten bucking bars offer the maximum density available. These tungsten bucking bars are more than twice as heavy as an identical bar made of steel. The small size and high density makes these bars versatile, able to fit in small areas. All bucking bars have a full radius on all edges for safety and ease of handling.
Tungsten bucking bars are resulting in a bucking bar of the same weight but half the size. Bucking bars are used in rivet setting to upset the shank of the rivet gun. Tungsten bucking bars reduce the recoil when reflecting the impact back to the rivet gun shaft.Rivet guns vary in size and shape.
Higher density reduces vibration and kick back while bucking. Take a cue from the pros and use what they use. We carry a full line of standard tungsten bucking bars and can custom build bucking bars to your specifications. All bars have smooth faces and rounded edges and corners for ease and safety in handling.

Applications for Tungsten Bucking Bar

Bucking bar is used to form buck tails on rivets. And come in many different shapes and
sizes. Tungsten bucking bar, tungsten bar is normally made from alloy steel similar to
tool steel. The particular shape to be used depends upon the location and accessibility of
the rivet to be driven.
Bucking bar, tungsten bar is used on the backside of a metal rivet to counter the force of
the hammering on the other side. They also can be used to absorb the force of rivet guns,
reducing the vibration of bucking.

Tungsten Bucking Bar

Tungsten Bucking bar is a work tool received behind work surfaces to provide a backing member in applying impact fasteners and including intermitted tool head and handle parts with a low-recoil impact-absorbing spacer provided there between to take shock loads in compression and shear.

How to Use Tungsten Alloys Canopy Weight

Tungsten alloys canopy weight can be easily used for pinewood derby car weighting if the weight of the car body, wheels, and axles is less than 1.5 ounces. Drill a 1/2 inch diameter hole into the top of the car body (generally the hole is drilled all the way through the car). Apply epoxy in the hole, and spread just a little epoxy on the top of the car as well. Mount the tungsten alloys canopy weight and allow it to dry.
Since tungsten alloys canopy weight is very hard, do not plan to drill out any extra weight. Instead, use an alternate method to make fine adjustments such as adding/removing tungsten beads, lead, or other items.

Advantages for tungsten alloy fishing weights

*Small body
*High density
*Nuisance free
*Strong wind resistance
*International environment protection standard
Chinatungsten Online can offer tungsten alloy fishing sinkers/weights, tungsten beads, tungsten jig at various shape, such as shape of bullet, drop, tube, semi-drop and cylinder. Besides, we can manufacture fishing sinkers/weights according to your drawings.

What is Fishing Weight or Fishing Sinker?

Tungsten weights are an ideal, environment-friendly alternative to lead weights, which are toxic and increasingly being labeled an environmental hazard. Tungsten weights are harder than steel and extremely dense, tungsten being on average 30 percent smaller than its lead counterpart. Tungsten weights are smaller than conventional weights, create twice the sound of lead weights and maintain their shape for longer. Tungsten is also used in the production of other fishing applications, such as tungsten carbide line cutters and tungsten powder coating for fishing lines.
A fishing sinker or plummet is a weight used to force a lure or bait to increase its rate of sink, anchoring ability, and/or casting distance. Fishing sinkers may be as small as 1/32 of an ounce for applications in shallow water, even smaller for fly fishing applications, or as large as several pounds or considerably more for deep sea fishing. They are formed into nearly innumerable shapes for diverse fishing applications. Environmental concerns surround the usage of most fishing sinker materials.

Tungsten Alloy Racket Weight

Tungsten alloy is right material for tennis rackets or the like to change the swing force and impact center known as the "sweet spot" on a tennis racket and more particularly relates to a snap-on weight that can be easily attached or removed.
All players have different swings and control of the racket although the swing fundamentals are the same. The intent is to make as square an impact with the ball as possible with the ball impacting as close as possible to the center of the tennis racket head known as the "sweet spot". But, size, weight, height, strength and other physical factors cause different players to alter the fundamental swing slightly causing "miss-hits" which in turn cause errors in the flight of the ball. A miss-hit, such as contacting the ball near the frame of the racket, will cause the ball to go in the direction different than where it is intended when the player swings.

Tungsten Alloy Helicopter Shoes

Tungsten alloy helicopter shoes are one of the components in the plane which is used on the ground parking, slide, landing taxiing used to support the weight of the plane crash, absorb energy. It can absorb and consume the hit energy when the plane landed. They have four functions:
Firstly, under gravity when the plane on the ground parking, sliding, taking off, running smooth and landing.
Secondly, bearing, consuming and absorbing the energy and turbulence when the plane landed in ground.
Thirdly, braking while the plane sliding.
Lastly, Steering airplanes while the plane sliding.

Tungsten Alloy Ball Pen Bead

China Tungsten Online can produce variety of tungsten alloy ball pen bead with sizes from Diameter 0.38 - 1.4mm. Tungsten heavy alloy ball has advanced production techniques and international technical level. Hardness>1400-1500, roughness Ra0.063-0.8 micron, Diameter Tolerance <0.001mm, lineation2000-2500m, wear-out<0.003mm, microspore uniform distribution, writes smoothly, lineation clearing, abrasion proof, long using life , printing ink’ wet ability well, carry over more printing ink, lineation clearing ; good handle ,taking bake superabundant printing ink.

Properties of Tungstne Alloy Canopy Weight

Since tungsten alloys canopy weight is very hard, do not plan to drill out any extra weight. Instead, use an alternate method to make fine adjustments such as adding/removing tungsten beads, lead, or other items.

Tungsten Alloy Tacky Weight

Tungsten alloy tacky weight is heavier than lead and is soft in cold or warm weather.Roll this malleable weight on your leader to match your desired sink rate. Tungsten alloy tacky weight is a form of tungsten alloy weight. A fair substitute for the old product was lead and much more pliable. Tungsten alloy tacky weight get's super hard and tough when the weather is cold and very hard to work with. During the hot summer months it is more users friendly. Tungsten alloy tacky weight is like pulling on an inter tube. It does stay on the leader quite well once you have it formed.

Tungstne Alloy Canopy Weight Used for Pinewood Derby Car

Tungsten alloy canopy weight can be easily used for pinewood derby car weighting if the weight of the car body, wheels, and axles is less than 1.5 ounces. Drill a 1/2 inch diameter hole into the top of the car body (generally the hole is drilled all the way through the car). Apply epoxy in the hole, and spread just a little epoxy on the top of the car as well. Mount the tungsten alloys canopy weight and allow it to dry.

How to Use Tungsten Alloys Canopy Weight

Tungsten alloys canopy weight is just over 1-3/4 inches long and just under 1-3/16 inches wide. The height above the car body is 1/3 of an inch. The mounting stud is 1/2 inch in diameter and 1/4 inch long. Your shipment will contain one tungsten alloys canopy weight.

Tungsten Alloy Canopy Weight

Tungsten canopy weight density is high, than the lead density, and smaller for the balance of the bait, it is very useful. Sludge easy to use does not generate pollution, not sticking to the wedge between the rocks, the weeds of the slits will not stick. Therefore, you can use less time to catch more fish.

Tungsten Alloy Aerospace Counterweight

With many advantages over conventional balance materials such as steel or lead, tungsten alloy counterweights are often used in Flight Control Systems to optimize the performance of flight control surfaces, such as rudders, elevators and ailerons.