How to Use Tungsten Alloy Canopy Weight

Canopy weight is just over 1-3/4 inches long and just under 1-3/16 inches wide. The height above the car body is 1/3 of an inch. The mounting stud is 1/2 inch in diameter and 1/4 inch long. Your shipment will contain one tungsten alloy weight.
Tungsten alloy canopy weight can be easily used for pinewood derby car weighting if the weight of the car body, wheels, and axles is less than 1.5 ounces. Drill a 1/2 inch diameter hole into the top of the car body (generally the hole is drilled all the way through the car). Apply epoxy in the hole, and spread just a little epoxy on the top of the car as well. Mount the product and allow it to dry.

Since tungsten alloy weight is very hard, do not plan to drill out any extra weight. Instead, use an alternate method to make fine adjustments such as adding/removing tungsten beads, lead, or other items.